gibbsie.org Knowledge Base

Show full configuration:
/info/slb/dump

Add a real server
/cfg/slb/real x
dis
rip w.x.y.z
name "hostname"
ena

Alter a real server configuration:
/cfg/slb/real x
inter 1
retry 3
restr 3

Show ports:
/info/port

Show filters on a specific port:
/info/slb/port x

Saving Configuration Changes

Make configuration active:
apply

Save configuration to flash:
save

Sync configuration with other node:
/oper/slb/sync

Save configuration to a TFTP server:
/cfg/ptcfg hostname_or_ip_address
Filename: devicename.config

Modifying Filters

List all configured filters:
/info/slb/filt list

Each LB port is associated to a filter range.

Create via:
/cfg/slb/filt 1122
name "2) Allow tcp9988 => TestServer"
ena
action allow
sip 1.2.3.4
smask 255.255.255.255
proto tcp
dport 9999
vlan any
/cfg/slb/filt 1122/adv
reverse ena

Bookmark to:

This post is tagged Alteon, Application Switch, Load Balancer, Networking, Nortel